TightRope Fixation for Ankle Syndesmosis
Overview
This technique is used to stabilize an ankle after injury. It can be used to repair a high ankle sprain, which damages the soft tissue structures between the tibia and fibula and causes these bones to separate. It can also be used to stabilize a fracture of the fibula. The TightRope™ system anchors the ends of the tibia and fibula together with a braided polyethylene cord, rather than with a rigid surgical screw, to restore the original position of the bones and to allow for proper healing.
Preparation
In preparation for the procedure, the patient is positioned and anesthetized, and the surgeon makes an incision on the outer side of the ankle to access the joint. If bony fragments have broken loose from the fibula, they are either removed or stabilized, and if the fibula has separated, the pieces are realigned.
Repairing the Fibula
The surgeon typically repairs the fibula by attaching a fixation plate. This plate is held in place by surgical screws. After the fibula has been stabilized, its relationship to the tibia can be restored and reinforced with the TightRope system.
Inserting the TightRope™
With the aid of a guidewire, the surgeon drills a tunnel through one of the lower holes of the fixation plate, through the fibula and all the way through the tibia. The surgeon passes the oblong TightRope™ button, threaded with the TightRope™ cord, through this tunnel. Once it has cleared the tibia, the oblong button is pulled back toward the tunnel. This causes it to swivel and lay flat against the tibial bone.
Anchoring the Bones
The surgeon pulls the ends of the TightRope™ cord to tighten the system, drawing a second metal button against the fixation plate on the fibula. A small knot is tied to secure the system, stabilizing the joint. If additional stability is needed, the surgeon may choose to drill a second hole and place a second TightRope.
End of Procedure and Aftercare
When the procedure is complete, the incisions are closed and the ankle is placed in a splint. Typically, the patient will not be able to bear weight on the ankle for six to twelve weeks, depending on surgeon preference. Once the doctor has determined that the ankle has healed properly, the patient can begin rehabilitation. Unlike the traditional screw syndesmosis reduction, the patient will typically not need to have the hardware removed before returning to unrestricted athletic activity.
Please be aware that this information is provided to supplement the care provided by your physician. It is neither intended nor implied to be a substitute for professional medical advice. CALL YOUR HEALTHCARE PROVIDER IMMEDIATELY IF YOU THINK YOU MAY HAVE A MEDICAL EMERGENCY. Always seek the advice of your physician or other qualified health provider prior to starting any new treatment or with any questions you may have regarding a medical condition.